Three-Dimension Parametric Simulation of Knitted Fabric Based on the Twisted Loop Model

To enhance the realistic simulation effect of knitted fabric, a new three-dimension （3D） twisted loop model was proposed. This model was constructed by using Non-uniform Rational B-Spline （NURBS） surface. The control points of this surface were generated through rotating the cross-section along the center path of yarn. The cross-section of yarn was generated based on the two-level hexagonal ~lose packing model. Both of the center path and the cross-section were fitted by NURBS. With this twisted loop model, 3D parametric simulation of knitted fabric was realized in 3DS MAX by utilizing MAXScript and analyzing the relationships between structure parameters （including the wale-spacing, the course-spacing, the yarn diameter, .and the fabric thickness） and geometric model. The simulation of knitted fabric has 3D realistic twist effect dearly. Furthermore, the structure parameters and the twist parameters of fabric can be modified interactively.     

广西龙湾铅锌矿床矿石矿物组构特征及成矿阶段划分

通过井下的详细勘查和显微镜下鉴定,对广西龙湾铅锌矿床的矿石组构特征进行了系统研究.矿区矿石构造主要为块状构造、浸染状构造、网脉状构造和斑杂状构造;结构主要为结晶作用和交代作用形成的结构,其次为固溶体分离作用、结晶物质重结晶作用和压力作用形成的结构.同时将成矿期次分为沉积成岩期、中低温热液成矿期和表生氧化期,其中热液成矿期是矿床的主要成矿期.根据矿物组合特征,将成矿划分为五个成矿阶段,分别是黄铁矿-石英-方解石阶段、闪锌矿-方铅矿-黄铁矿阶段、黄铁矿-闪锌矿-方铅矿-黄铜矿阶段、石英-方解石阶段、氧化物阶段.矿物的生成顺序为黄铁矿1-闪锌矿(黄铜矿1)-方铅矿-黄铁矿2-黄铜矿2.最终确定龙湾矿床为受构造活动控制的中低温热液充填交代-叠生改造型多金属矿床.     

基于熵和变异度的织物疵点图像分割方法

针对现有织物疵点图像分割方法对光照不均匀敏感的问题,提出了一种基于局部熵和变异度的织物疵点图像分割方法。首先对织物图像进行局部熵和变异度计算,提取疵点的类边缘和区域信息;然后基于人工神经网络脉冲耦合（PCNN ）的区域生长法分割织物疵点图像。通过对T ILDA数据库中的疵点图像和基于线阵CCD在线检测的织物疵点图像进行测试,并与已有的相关方法进行对比实验和评价。结果表明,该方法不仅能有效地抑制光照不均匀和复杂背景干扰的影响,而且分割质量有了明显改进。     

一种立体织机平行打纬机构的设计与优化

针对多层织物织造过程中,各层纬纱打纬力需保持一致以及需要减少钢筘与纱线之间摩擦的要求,提出八连杆平行打纬机构,并根据工艺要求对打纬机构进行优化。以打纬机构的主轴转动140°时,筘座在后心位置处的近似静止位移Δs最小为优化目标,通过Matlab软件分析确定设计变量,优化钢筘在后死心位置的近似停留时间。运动学仿真结果表明,优化后的打纬机构不仅保证了钢筘的打纬动程和其在后死心处的静止时间,而且增大了钢筘的惯性打纬力,有利于厚重织物的打纬。     

Application of Spacer Fabric for Protecting Cushion

Spacer fabric is a typical three-dimensional fabric, including upper layer, lower layer, and spacer layer. It is widely applied in protecting cushion products for unique space structure, which attributes good comfortability to infants and the disabled elderly in reducing diseases resulting from hot and humidity under long-time sitting and lying period. It necessitates studying the microenvironment change between body and clothes and corresponding performance. Compressibility. air permeability, heat and moisture permeability, and bending and humiture in microenvlronment of spacer fabric are analyzed and compared with foam cushion and nonwoven cushion. Experimental results show that corresponding performance of spacer fabric is better in protecting cushion than those of foam and nonwoven. Compared with traditional foam cushion and non-woven cushion, spacer fabric is more suitable for protecting cushion, and provides an alternative and optimal cushion material in medical products to protect infants and the disabled elderly from bedsores resulted from long-time sitting and lying.     

初始组构影响砂土直剪力学性状的数值模拟

文中基于PFC2D 非圆颗粒单元的二次开发,通过制备两种不同初始颗粒定向的数值试样,分别为水平定向(H试样)和竖直定向(V试样),研究了初始组构对砂土直剪力学性状的影响.数值试验过程在对比分析两种不同颗粒定向试样直剪宏观力学响应的同时,从颗粒尺度层面探讨了不同颗粒定向试样的初始组构特征,揭示了初始组构影响砂土直剪的细观力学机理.结果表明,颗粒竖直定向的试样其抗剪强度要高于水平定向试样,在细观机理上不同颗粒定向试样的初始平均接触数有关.     

Influence of Clothing Fabrics on Skin Microcirculation

This study investigated the effects of clothing fabric on human skin microcirculation.Once skin is covered with a clothing fabric,human sensations,namely,coolness,warmth,softness,and roughness,are aroused immediately,and the cutaneous microcirculation may be changed consequently.Since the complex relationships of the human skin,the environment,and the clothing,there is few publication focusing on the physiological responses of the skin to the fabrics.In this paper,a Laser Doppler Flowmetry(LDF)was used to t...     

Investigation on Bending and Creasing of Woven Fabrics under Low Curvature

Under the assumption of semi - circular form for a fabric bend, creasing of fabric strips and compression of fabric loops are analyzed by neglecting the structural complexity of the fabric. The relationship between the creasing force and deformation are deduced using an energy method and solutions are given for a linearly elastic material with constant internal frictional constraint. The agreements between the theoretical predictions and experimental results are very satisfactory.